Blade 400 Flight and CRASH!!!
I didn't get to fly in the past 3 weeks and thought I'd give some low level 3D a try.....BIG MISTAKE!!!!
3D Helicopter Demo by Dave Herbert (NightFlyyer) plus an "Orientation TEST" for you.
*Heli 3D TEST. If you can follow my mild 3D flight and can tell exactly what I am doing the entire time with the transmitter sticks, then you are probably ready for 3D helicopters. At this point the learning process will begin again! Watching others fly helps me, so maybe this will help you. That...
nightflyyer- Length: 9:44
- Views: 14266
- Tags: Helicopterstunts 3dheli horizonhobby Horizon Hobby Spektrum Dx6i Blade 400 R/C 3dhelicopter demonstration inverted flying loops rolls aerobatics stunts Cessna greased landing Nitro aircraft helicopters aviation nitroplanes hobbypartz RC nightflyyer Dave Herbert Xheli Sibley Iowa airplane jet military high speed engine high rev engine vehicle model vehicles howto air force airplanes david truck motor sports
-
E-Flite Blade 400 3D
A breakdown and review of the E-Flite Blade 400 3D including key features and selling points.
- hobbyconcepts
- Length: 4:30
- Views: 189488
- Tags: Horizon Hobby Hobbyconcepts E-flite Blade 400
-
HorizonRC.com How-To: First Time Blade 400 Pilots - Try our DX6i Setup
The combination of the E-flite Blade 400 helicopter and Spektrum DX6i introduced a new level of RTF performance with a fully ready to fly, 3D-capable model. Many pilots are having their first experience with a high performance RC helicopter, and the Blade 400 can be great fun. Mark Padilla, E-fli...
- horizonrcdotcom
- Length: 10:00
- Views: 150083
- Tags: Horizon RC Radio Controlled E-flite Blade 400 mcx CX2 CX3 CX Helicopter How-To dx6i Spektrum Programming Rotor Coxial Heli
-
Dave & Eric Fly Blade 400 RC Helicopters
Dave Herbert aka Nightflyyer and Eric Jordon aka Joehandsome99 fly blade 400's together.
- joehandsome99
- Length: 5:20
- Views: 79737
- Tags: dave herbert nightflyyer eric jordon joehandsome99 blade 400
-
Surprise Crash at end..Blade 400 Heli review.
At $469.99 (discounted from $599), Donovan's has a good price on the Blade 400. I believe (but could be wrong) that if you mention this video, you will get free shipping too. Donovan's service alone is worth it. This is PART I of my Blade 400 experience. This is definitely not a beginner's helico...
Jamie Robertson - Blade 400 #1
Blade 400 - Equipment used during this flight: TP2200V2, Radix 325s, stock gyro, stock servos, JR 3400G tail servo, T-rex carbon tail blades, grips and mixers flipped, stock paddles, stiffer dampening, stock motor & pinion. It will fly as well on the stock blades without the extra pop the Radix b...
Blade 400 3D 2 Flights, 2 cams & 2 Sounds!
**Watch in High Quality! By request for "full sound" of the Blade while flying. (*Listening to your Heli is another important part of the learning curve!) The video is from 2 different cameras at the same time. The Sony GC-1 is held by Jeff and the Aiptek PocketCam X is on board my Blade 400 heli...
Eric's Blade 400 3D First Flights
5-2-2008 I just got my new blade 400 today and could not wait to get the battery charged for the first flight. It was very windy today, but it is my new toy so I had to try it out. You can see the wind gusting the trees in the background while I practice hovering it. The blade 400 is an awesome h...
Blade 400 Helicopter-Part II, Test Ride
This is the Pitch Curve and Trimming flights of the Blade 400. This is my Electronic and Mechanical "break in" period. It allows me to test and trim my equipment before really getting aggressive. It also allows me to find out the characteristics of this heli's flight. It is all part of the learni...
T-REX 450 BLADE 400 ALL OUT WAR MUST SEE VIDEO
T-REX 450 VS. BLADE 400 A WAR THAT GET'S BETTER AT THE END, AND YES A CRASH. NO HELI PILOT'S WERE HARMED FILMING THIS VIDEO. JUST A FEW BURN MARKS!
- shauna20118
- Length: 7:28
- Views: 147709
- Tags: T-REX 450SE BLADE 400 CRASH VIDEO RC HELI HELICOPTER
-
Blade mSR 1 Blade, Inverted Hovering Blade 400, Blade 450 trim, and Single Rotor Gas Heli demo.
* Please Read before Commenting* Challenged to make a 1 bladed mSR...I did! If your bored with everyday flying like I am, then step out of the box and try the things most people would not. I have proven this 1 bladed stuff with all kinds of helis and airplanes and have videos to prove it too. The...
- nightflyyer
- Length: 9:18
- Views: 13401
- Tags: Blade msr Onebladed oneblade singleblade 1blade 1bladed helicopter heli rotorhead sockethead hammerhead R/C microhelicopter fly flew flown Rotory Rotor rotors Hyperfly Apache NOTAR notailrotor etrm tailrotor counterrotating Dave Herbert Nightflyyer Sibley Iowa Horizon Hobby 400 mcx2 mcx300 Hughes aircraft Kyosho Nexus30 Nexus nitro gas demo AMA Aviation History breakthrough aero modeling Xheli Nitroplanes Hobbypartz
-
E-Flite Blade 400
The demo of E-Flite's new Blade 400 due in Nov 2007. The Blade 400 comes with the spektrum DX6i and is powered by a brushless motor / lipo combo.
- modelflight
- Length: 1:07
- Views: 27003
- Tags: Eflite blade 400 dx6i spektrum helicopter rc rtf
-
Blade 400 Rotor Head Repair, after a Boom Strike.
Flying longer than the battery allowed caused me to have to land fast! This is what broke, how I fixed it, and how it flew afterwards. I used $20 in Parts and $12 for a new Hitec HS 55 "Feather" servo. Hope you enjoy. Remember: Everybody crashes r/c's sooner or later, especially if you push the l...
Page: 1 of 425
